Complete 360 degree viewing and cool low-wattage LED lighting in one aquarium kit. Great for small freshwater fish, the Aquaview 360 includes a hood with LED lighting, air pump and undergravel filter.
Specifications Capacity 3 GALLON
Lamp Style LIGHT CHANGING LED
Tank Type TUBULAR
Instructions 1. Remove all parts from package carefully. 2. Rinse the tank with warm water only - NEVER USE SOAP TO CLEAN THE TANK. 3. The area you are going to place an Aquarium should not get any direct sun light and make sure to place the unit on a surface that cannot be damaged from water. 4. Place the LED Light Unit in the center of the area you have chosen to setup the Aquarium and place the Tank over it making sure to line up the slot provided in the Tank's bottom to the LED Light Unit. The LED bulbs should be lined up with the center of the Tank. 5. Insert Riser Tube all the way into the socket provided in the Filter Plate. 6. Lower Filter Plate into Tank with the Riser Tube pointing up. 7. Add gravel and decorations as desired (purchased separately). 8. Connect Air Stone to one end of the Rigid Tube and Insert Tubing Adapter in other end. Insert the Flexible Air Line down through the top of the Domed Hood and connect the Flexible Air Line Tubing, to the Tubing Adapter. 9. Connect the other end of the Air Line Tubing to the Air Pump. 10. Fill Tank with water to approximately 1 in from the top of the Tank. 11. Place the Domed Hood onto the top of the Tank making sure it is seated flush oto the Tank's rim. 12. Form a drip loop to the right and plug in the Air Pump into a standard 110 volt wall socket. 13. Form a Drip loop with the LED Transformer cable and plug the small round end into the LED Light Unit then plug the Transformer into a standard 110 volt wall socket. 14. BEFORE ADDING FISH the water should be checked for it's suitability to accept whatever type of fish you will be adding.