The Micro Clean 304 is a fully
submersible internal filter for fresh and saltwater aquariums and turtle tanks
up to 15 gallons. The filter provides mechanical and chemical filtration with
easy to replace filter cartridges. The flow rate is adjustable from 30 to 55 gph
and uses just 4 watts.
This internal mini-filter includes 3 small suction cups for mounting and a water
diverted. It can be placed in the tank horizontally and vertically. When placed
in the tank horizontally the diverse outflow can be used with the included water
diverted to form a fountain or 1/2" tubing can be used to create a small
waterfall.
Instructions:
Attach the suction cups on the filter and mount the filter to the aquarium.
Rotate the valve toward the minimum or maximum indicator as necessary. Do not
let the filter run dry. Maintenance:
Periodically clean the filter, the rotor and the pump chamber to remove any
debris, which could block the unit. It is recommender to replace the filter
cartridge after 3 or 4 risings or when it appears to be damaged to ensure the
maximum efficiency.The motor is fully encapsulated and self protected against
overheating and needs no particular care. If the pump fails to work, check first
the electrical supply, connections, and circuit breaker. If these are correct,
the pump needs to be cleaned.Prior to any work on the unit, disconnect all
electrical equipment from the power. Remove the filter from the motor housing
and open it. Pull off the rotor from its location and wash all the components
with the help of a non-metallic brush. If necessary remove lime-scale by leaving
the components immersed in vinegar or rinse it under luke-warm water. Reassemble
the unit so that all the components are placed in their original position.
Size:
4 1/2"L X 1 3/4"W X 1 1/4"H
5 1/2" water resistant cord
