This filter provides both mechanical &
biological filtration. Aerobic bacteria colonize the sponge, providing a
bacterial substrate to facilitate the nitrogen cycle. In addition, it traps
larger particles, mechanically cleaning the water. Good up to a 20 gallon tank.
Size: 3" dia x 10" high, when you add extension it is 11" high. Related items:
you will need an air pump, airline tubing & an air stone or just a powerhead &
tubing to run filter.
Item Number: LP0014
The Hydro-Sponge I Filter provides both mechanical and biological filtration for
aquariums up to 10 gallons. Aerobic bacteria colonize the sponge, providing a
bacterial substrate to facilitate the nitrogen cycle. In addition, the
Hydro-Sponge traps large waste particles, mechanically cleaning the water. The
Hydro-Sponge filters are designed for stackablility to increase the filtering
capacity.
Instructions:
Rinse and squeeze the sponge under water and slip the sponge on the strainer.
Directions for use with a airstone: Connect airstone to the bottom of the bull's
eye, then connect bull's eye to the top of the strainer. A pump, airline tubing,
and airstone are needed.
Directions for use with a power head: Attach the power head to the lift tube.
Maintenance:
Rinse the sponge with cool, running water weekly. Do not use hot or cold water
as this will destroy the bacteria which colonize the sponge. Do not use soap or
detergent when rinsing the sponge.
Size:
Sponge: 4" diameter x 2" high
Lift tube: 1" diameter x 5" high
Whole filter: 4" diameter x 9 1/2" high
