Transform your MP10 to an MP10wES with the EcoSmart Upgrade kit. The wireless EcoSmart Driver mimics realistic tidal currents, allowing for proper nutrient dispersal and detritus removal, also ensuring even heat dispertion. Multiple VorTech units wirelessly communicate with each other and coordinate tidal modes.
Nutrient Transport Mode (NTM) - A two phase program that promotes maximum nutrient export, as well as increased growth and vigor in corals. Alternates between a resonant standing wave and a surge effect to stir up and export nutrients.
Tidal Swell Mode (TSM) - Creates balanced changing flow conditions that would be found in nature. Flow varies from left to right, right to left, calm, and ends with a great surge.
Reef Crest Random Mode - Reef Crest Random Mode simulates the high-energy conditions of a natural reef crest environment.
Lagoonal Random Mode - Simulates the gentler reef zone found in a natural lagoon.
Short Pulse Mode - Allows for wave pulse timings between 0.3 and two seconds, enabling the creation of quickly alternating flow throughout the tank. Use this mode to create a resonant standing wave.
Long Pulse Mode - Allows for wave pulse timings of between 2 seconds and 60 seconds, enabling the creation of slow alternating flow throughout the tank.
Feed Mode - Slows down pump to allow user to feed aquarium. User can select the duration and speed for Feed Mode.
Night Mode - Automatically reduce speed and operates continuously at that speed for a period of time during the night. User can select the duration and speed for Night Mode.
Battery Backup Mode - When used with our battery backup accessory, the VorTech pump will switch to Battery Backup Mode in the event of a power outage and operates at a user set speed. The LED's on the driver indicate how much power is available within the battery.
Auto-Dim - LED's are turned off and display knob dimmed significantly, but pump functions in its current mode. User can program how long after use before the driver enters Auto-Dim.
On/Off Switch - Tap the on/off switch to turn off and turn on a pump. Hold this button to turn off all pumps in a master/slave group. Tap any pump in the groups' on/off switch and that pump will turn back on.